logo
lalco
 
ROTARY VACUUM EVAPORATOR:
coming soon
CODE : 145-DCT

DISCRIPTION:
This model of evaporator is supplied complete with geared drive non sparking noiseless motor offering smooth speed control by analog knob upto 200RPM, Jack arrangement is fitted on tapered front base for positioning glass assembly, double walled water bath thermostatically controlled temp., glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800ml., receiver flask capacity one litre fitted with a ball joint, feeding tube and vapour path tube provided with a seal, clips and spring a Complete working unit.


Replacement Parts for 145-DCT
145/02 Condenser Double coiled with S-35 Cup
145/03 Gasket Seal for Vapour path Tube (Viton)
145/04 Gasket Seal for special chemical
145/05 Vapour path tube B-24, B-29
145/06 Feed Tube for condenser without Teflon pipe
145/07 Evaporating flask R.B. 1 Ltrs B-24 socket
145/08 Receiving Flask with S-35 cup (socket) joint
  Capacity 1000ml
145/09 Evaporating Flask kjeldhal cap. 800ml B-24
145/10 Evaporating Flask kjeldhal cap. 500ml B-24
145/11 Evaporating Flask kjeldhal cap. 300ml B-24
145/12 Evaporating Flask kjeldhal cap. 100ml B-24
145/13 Tension spring to hold condenser
145/14 Wire clip to hold vapour tube and boiling flask
145/15 Ball joint clip S-35 with Screw lock
145/16 Water bath double walled inner S.S. with
  Thermostatic Temperature Controller
145/17 Spare Heater for Water Bath (ISI Mark)

A Portable Diaphragm Type Vacuum Pump cum Air Compressor, Oil Free, Light Weight Cap. 45 Ltrs/ Min, 27 Max Vacuum (in Hg.), 60 Max Press. (PSIG), H.P. Motor suitable for above model

 

coming soon
CODE : 146-DCD

DISCRIPTION:
This model of evaporator is supplied complete with geared drive non sparking noiseless motor offering smooth speed control by analog knob upto 200RPM, Jack arrangement is fitted on tapered front base for positioning glass assembly, double walled water bath with Digital Temperature Controller., glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800ml., receiver flask capacity one litre fitted with a ball joint, feeding tube and vapour path tube provided with a seal, clips and spring a Complete working unit.
Replacement Parts for 146-DCD
146/02 Condenser Double coiled with S-35
146/03 Gasket Seal for Vapour path Tube (Viton)
146/04 Gasket Seal for special chemical
146/05 Vapour path tube B-24, B-29
146/06 Feed Tube for condenser
146/07 Evaporating flask R.B. 1 Ltrs B-24 socket
146/08 Receiving Flask with S-35 cup (socket) joint
  Capacity 1000ml
146/09 Evaporating Flask kjeldhal cap. 800ml B-24
146/10 Evaporating Flask kjeldhal cap. 500ml B-24
146/11 Evaporating Flask kjeldhal cap. 300ml B-24
146/12 Evaporating Flask kjeldhal cap. 100ml B-24
146/13 Tension spring to hold condenser
146/14 Wire clip to hold vapour tube and boiling flask
146/15 Ball joint clip S-35 with Screw lock
146/16 Water bath double walled inner S.S. with
  Digital Temperature Controller
146/17 Spare Heater for Water Bath (ISI Mark)

A Portable Diaphragm Type Vacuum Pump cum Air Compressor, Oil Free, Light Weight Cap. 45 Ltrs/ Min, 27 Max Vacuum (in Hg.), 60 Max Press. (PSIG), H.P. Motor suitable for above model

 

coming soon
CODE : 147-VCT

DISCRIPTION:
This model of evaporator is supplied complete with geared drive non sparking noiseless motor offering smooth speed control by analog knob upto 200RPM, Jack arrangement is fitted on tapered front base for positioning glass assembly, double walled water bath thermostatically controlled temp, Vertical., glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800ml., receiver flask capacity one litre fitted with a ball joint, feeding tube and vapour path tube provided with a seal, clips and spring a Complete working unit.
Replacement Parts for 147-VCT
147/02 Vertical condenser double coiled with two outlets for water circulation. With S-35 Ball at bottom for connecting to receiving flask, quick fit type joint at top for vacuum. Cock for feeding tube on one side while the outer side will be connected to motor with ring.
147/03 Gasket Seal for Vapour path Tube (Viton)
147/04 Cone Adaptor for condenser to Vacuum Pump
147/05 Vapour path tube B-24, B-29
147/06 Feed Tube for condenser without Teflon pipe
147/07 Gasket Seal for special chemical
147/08 Receiving Flask with S-35 cup (socket) joint
  Capacity 1000ml
147/09 Evaporating Flask kjeldhal cap. 800ml B-24
147/10 Evaporating Flask kjeldhal cap. 500ml B-24
147/11 Evaporating Flask kjeldhal cap. 300ml B-24
147/12 Evaporating Flask kjeldhal cap. 100ml B-24
147/13 Tension spring to hold condenser
147/14 Wire clip to hold vapour tube and boiling flask
147/15 Ball joint clip S-35 with Screw lock
147/16 Water bath double walled inner S.S. with
  Digital Temperature Controller
147/17 Spare Heater for Water Bath (ISI Mark)

A Portable Diaphragm Type Vacuum Pump cum Air Compressor, Oil Free, Light Weight Cap. 45 Ltrs/ Min, 27 Max Vacuum (in Hg.), 60 Max Press. (PSIG), H.P. Motor suitable for above model.

 

coming soon
CODE : 147-VCD

DISCRIPTION:
This model of evaporator is supplied complete with geared drive non sparking noiseless motor offering smooth speed control by analog knob upto 200RPM, Jack arrangement is fitted on tapered front base for positioning glass assembly, double walled water bath with Digital Temperature controller, Vertical., glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800ml., receiver flask capacity one litre fitted with a ball joint, feeding tube and vapour path tube provided with a seal, clips and spring a Complete working unit.
Replacement Parts for 146-DCD
147/02 Vertical condenser double coiled with two outlets for water circulation.  With S-35 Ball at bottom for connecting to receiving flask, quick fit type joint at top for vacuum.  Cock for feeding tube on one side while the outer side will be connected to motor with ring.
147/03 Gasket Seal for Vapour path Tube (Viton)
147/04 Cone Adaptor for condenser to Vacuum Pump
147/05 Vapour path tube B-24, B-29
147/06 Feed Tube for condenser without Teflon pipe
147/07 Gasket Seal for special chemical
147/08 Receiving Flask with S-35 cup (socket) joint
  Capacity 1000ml
147/09 Evaporating Flask kjeldhal cap. 800ml B-24
147/10 Evaporating Flask kjeldhal cap. 500ml B-24
147/11 Evaporating Flask kjeldhal cap. 300ml B-24
147/12 Evaporating Flask kjeldhal cap. 100ml B-24
147/13 Tension spring to hold condenser
147/14 Wire clip to hold vapour tube and boiling flask
147/15 Ball joint clip S-35 with Screw lock
146/16 Water bath double walled inner S.S. with
  Digital Temperature Controller
147/17 Spare Heater for Water Bath (ISI Mark)

A Portable Diaphragm Type Vacuum Pump cum Air Compressor, Oil Free, Light Weight Cap. 45 Ltrs/ Min, 27 Max Vacuum (in Hg.), 60 Max Press. (PSIG), H.P. Motor suitable for above model.